Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Previous revision
soguiders [2018/05/20 11:39]
soguiders [2018/11/16 08:50] (current)
lesser update website location
Line 1: Line 1:
 +===Bok guider for 90Prime - 90PrimeGuider===
 + 
 +  - Characterized 14Aug06 @ ITL
 +  - Gain - 3.4 e/DN
 +  - Noise - 12.9 3
 +  - Full Well - 139,000 e unbinned
 +  - Dark Current - 3.1 e/​pixel/​second
 +  - Operating CCD temperature:​ -38C
 +  - ARC Gen2 camera controller
 +  - Guider dewar 1
 +  - Detector serial number - sn2944
 +  - Pixels: 512x512 15x15 microns
 +  - Device type: 512FT
 + 
 +===Bok guider for BCSpec - BokCassGuider===
 + 
 +  * Characterized 15Mar07 @ ITL
 +  * Installed 18Mar07
 +  * Gain - 3.1 e/DN
 +  * Noise - 18 e
 +  * Full Well - 76,000 e unbinned
 +  * Dark Current - 4.5 e/​pixel/​second
 +  * Operating CCD temperature:​ -37C
 +  * Magellan/​ITL camera controller
 +  * Guider dewar 4
 +  * Detector serial number - sn3010
 +  * Pixels: 512x512 15x15 microns
 +  * Device type: 512FT
 + 
 +===Kuiper (61") guider - BigGuider===
 + 
 +  * Characterized 25Mar08 @ ITL
 +  * Gain - 2.6 e-/DN
 +  * Noise - 8.8 e-
 +  * Full Well - 103,000 e- unbinned
 +  * Dark Current - 126 e-/​pixel/​second
 +  * Operating CCD temperature:​ -43C
 +  * ITL/​Magellan camera controller
 +  * Guider dewar 11
 +  * Detector serial number - sn4134
 +  * Pixels: 512x512 15x15 microns
 +  * Device type: MIT/LL CCID-37
 + 
 +===MMT guider - MMTGuider===
 + 
 +  * Characterized 16Jun06 @ ITL
 +  * Gain - 3.6 e/DN
 +  * Noise - 5.3 e
 +  * Full Well - 103,000 e unbinned
 +  * Operating CCD temperature:​ -37 C
 +  * ARC Gen3 camera controller
 +  * Guider dewar 7
 +  * Detector serial number - sn4135
 +  * Pixels: 512x512 15x15 microns
 +  * Device type: MIT/LL CCID37
 + 
 +===SPOL guider - SPOLGuider===
 +  * E2V CCD57
 + 
 +===Steward Guider Technical Info===
 + 
 +==PC Setup==
 + 
 +  * Turn off firewall
 +  * Turn off Windows update
 +  * Perform all updates manually
 +  * Make sure ControllerServer service is running
 +  * Set IP address
 +  * Check that the dewar temperature is read back from system and reads about 25 C at room temperature
 +  * Check that ROI is set so there are no dark edges around the 512x512 image
 +  * Copy PC code to backup site
 +  * Enable remote Desktop Connection
 +  * 
 +[[http://​cameras.itl.arizona.edu/​cameras/​files/​soguiders/​StewardGuiderArchitecture.gif|SOGuider Architecture]]